
Processing services
Processing Services
Slitting, cut-to-length, swing shearing, blanking and laser welding — with the working range of every line.
What we run
Seven lines, from master coil to welded blank
Two slitter lines, two cut-to-length lines, one flying-shear line, one combined cut-to-length and blanking line with a 630 tons press, and a laser welding station. Below is the working range of each line, so you can check your parts against it before you ask for a quotation.
- 0.3 – 5.5 mmThickness range
- up to 1,850 mmCoil width
- ≤ 1250 MPaTensile strength
- 25 tMax. coil weight
Working ranges
Line by line
Every figure below comes from the equipment data sheets of the plants that process our material.

Slitter
Slitter line · 1,600 mm
- Material
- Cold rolled, galvanized and pickled steel, σb ≤ 590 MPa, σs ≤ 400 MPa
- Thickness × width
- 0.3 – 3.0 mm × 200 – 1,600 mm
- Strips
- 6 strips at 2.1 – 3.0 mm · 12 strips at 1.1 – 2.0 mm · 20 strips at 0.5 – 1.0 mm
- Width tolerance
- ±0.05 mm up to 1.0 mm thick, ±0.10 mm above
- Burr / straightness
- Burr ≤ 5% of thickness (0.04 – 0.15 mm) · straightness 0.5 mm per 1,000 mm
- Line speed
- up to 130 m/min (1.6 – 3.0 mm), up to 150 m/min (0.3 – 1.5 mm)
- Coil
- max. 20 t · ID Φ508 mm (Φ610 mm with sleeve) · OD max. Φ2,000 mm
- Minimum strip
- 30 mm wide

Slitter
Slitter line · 1,850 mm
- Material
- Cold rolled, galvanized and pickled steel, σb ≤ 730 MPa, σs ≤ 550 MPa
- Thickness × width
- 0.8 – 5.5 mm × 300 – 1,850 mm
- Strips
- 5 at 4.5 mm · 6 at 4 mm · 10 at 3 mm · 18 at 2 mm · 30 at 1 mm
- Width tolerance
- ±0.05 mm up to 0.8 mm thick, ±0.10 mm above
- Burr / straightness
- Burr ≤ 5% of thickness (0.04 – 0.15 mm) · straightness 0.5 mm per 1,000 mm
- Line speed
- up to 150 m/min (1.6 – 3.0 mm), up to 180 m/min (0.3 – 1.5 mm)
- Coil
- max. 25 t · ID Φ508 mm (Φ610 mm with sleeve) · OD max. Φ2,000 mm
- Installed power
- 350 kW

Cut-to-length
Cut-to-length line · 1,650 mm
- Material
- Cold rolled and galvanized coil, σb ≤ 700 MPa, σs ≤ 630 MPa
- Sheet size
- Thickness 0.3 – 3.0 mm · width 200 – 1,650 mm · length 250 – 4,000 mm
- Length tolerance
- ±0.3 mm at constant speed, ±0.5 mm during acceleration
- Diagonal / flatness
- Diagonal ±0.5 mm (L = 2 m) · flatness ≤ 1.5 mm/m²
- Output
- up to 80 m/min · up to 120 cuts per minute
- Coil Data
- max. 25 t · ID Φ508 mm · OD max. Φ2,000 mm
- Stacking
- max. 5 t per stack · stack height 650 mm · stacking accuracy 1.5 mm

Cut-to-length
Cut-to-length line · 1,300 mm
- Material
- SPFH590, S550MC, SAPH440 and other cold rolled or galvanized coil, σb ≤ 730 MPa, σs ≤ 650 MPa
- Sheet size
- Thickness 0.8 – 5.5 mm · width 200 – 1,300 mm · length 250 – 4,000 mm
- Length tolerance
- ±0.5 mm up to 2 m, ±0.6 mm from 2 to 4 m
- Diagonal / flatness
- Diagonal ±0.5 mm · flatness ≤ 1.0 mm/m²
- Output
- up to 50 m/min
- Coil Data
- max. 20 t · ID Φ508 mm · OD max. Φ1,800 mm
- Installed power
- 265 kW

Narrow strip
Flying-shear line · 800 mm
- Material
- Cold rolled, galvanized and pickled steel, σs 250 MPa / σb 500 MPa
- Sheet size
- 0.3 – 2.5 mm × 100 – 800 mm, or 0.3 – 3.0 mm × 100 – 650 mm
- Accuracy
- Length ±0.3 mm at constant speed (±0.5 mm variable) · diagonal ≤ ±0.5 mm/m · flatness 0.5 – 1.2 mm/m²
- Blank size
- Width 150 – 800 mm · length 250 – 2,200 mm
- Output
- Working speed 10 – 70 m/min · up to 120 cuts per minute
- Coil Data
- max. 7 t · ID Φ508 mm · OD Φ700 – Φ1,700 mm
- Surface protection
- Air cushion stacking · 160 kW installed power

Blanking
Blanking line · 1,300 mm with 630 t press
- Material
- SPFH590, S550MC, SAPH440 and other cold rolled or galvanized coil, σb ≤ 730 MPa, σs ≤ 620 MPa
- Blank size
- Thickness 0.8 – 4.5 mm · width 300 – 1,300 mm
- Blank shapes
- Rectangles from the shear, trapezoids from the swing-shear die, free-form blanks from a blanking or progressive die
- Shearing
- 4.5 mm on the shear, 3 mm on the swing shear · swing angle ±35°, accuracy ±0.12°
- Accuracy
- Length 0.5 mm per 2 m · diagonal 0.8 mm per 2 m
- Output
- Levelling up to 50 m/min · servo feed up to 100 m/min · 20 – 38 sheets per minute · 20 – 40 blanking strokes per minute
- Press Data
- 6,300 kN (630 t) · slide stroke 300 mm · table size 4,000 × 2,000 mm · die height 1,100 mm with 400 mm adjustment · 110 kW main motor
- Coil Data
- max. 20 t · ID Φ508 / Φ610 mm · OD max. Φ1,800 mm

Laser welding
Laser welding Station
- Laser
- German Laserline diode laser, max. 5,000 W, with Laserline fiber, welding head and HD CCD seam tracking
- Blank size
- Thickness 0.5 – 3.2 mm · weld length 80 – 650 mm · width 100 – 900 mm (up to 1,500 mm)
- Accuracy
- Positioning ±0.03 mm · welding speed up to 70 m/min · double sheet detection
- Typical parts
- Front and upper side members, rear wheel-house closing plates, windscreen cross members, side-member extensions, rocker reinforcements, seat rails
Packing & delivery
Protected from
the line to your dock
Standard or premium packing on request, with the packing list and mill test certificate travelling with every bundle.

Sheets
Standard: kraft paper and a timber frame. Premium: kraft paper, timber frame and steel edge protectors.

Slit coils
Kraft paper and a timber frame, strapped on both diameters.

Loading
Bundles are weighed, labelled and secured on the truck.

Delivery
Delivered to your plant with the packing list and mill test certificate.
Send us your drawing
Tell us the part,
we will pick the line
Send the grade, thickness, width and annual volume — we will confirm the material, the processing route and the delivery plan.