Product center

Product Center

Flat-rolled steel and aluminum from China's leading mills, supplied as coil, slit coil, sheet or blank.

  • Newest
  • Oldest
  • Name A-Z
  • Name Z-A
Total: 6 Products
Pickled Steel Coil & Sheet

Pickled Steel Coil & Sheet

Hot-rolled, pickled and oiled steel with a clean, scale-free surface, supplied as coil, slit strip or cut sheet for stamping and structural parts.

Request a Quotation
Cold Rolled Steel Coil & Sheet

Cold Rolled Steel Coil & Sheet

Cold rolled low-carbon steel from commercial to extra-deep-drawing quality, with tight thickness tolerance and a smooth surface for precision stamping.

Request a Quotation
Galvanized Steel Coil & Sheet

Galvanized Steel Coil & Sheet

Hot-dip zinc-coated steel in DC51D+Z to DC57D+Z grades, available passivated, non-passivated, anti-fingerprint or with heavy zinc coating.

Request a Quotation
Automotive High-Strength Steel

Automotive High-Strength Steel

High-strength and advanced high-strength steels for body-in-white, chassis and safety parts, from hot-rolled SAPH to coated dual-phase grades.

Request a Quotation
Stainless Steel Coil & Sheet

Stainless Steel Coil & Sheet

Austenitic and ferritic stainless steel coil and sheet in 304, 316L and 430, slit or cut to size for fabrication and stamping.

Request a Quotation
Aluminum Sheet & Coil

Aluminum Sheet & Coil

Aluminum sheet and coil from Chinalco, Mingtai and other leading producers, in 1000, 3000, 5000 and 6000 series alloys.

Request a Quotation

Grade overview

Materials at a glance

Chinese standard grades we supply regularly. Standards, sizes and international equivalents are listed below; each grade can be supplied with the mill test certificate.

Material familyTypical gradesDetails
Pickled Steel Coil / SheetSPHC, SPHD, SPHE, SPHF · 20#, 45#, 50#, 65Mn
Cold Rolled Steel Coil / SheetSPCC – SPCG, DC01 – DC06
Galvanized Steel Coil / SheetDC51D+Z – DC57D+Z (passivated, non-passivated, anti-fingerprint, heavy zinc coating)
Automotive Steel Coil / SheetSAPH370 – SAPH440, SPFH590, QSTE340TM – QSTE600TM, HC260LA – HC500LA, HC260LAD+Z – HC420LAD+Z, HC250/450 – HC820/1180DPD+Z
Silicon Steel35W210 – 50W1300 (non-oriented), 23Q110 – 30QG115 (grain-oriented)
Stainless Steel Coil / SheetSUS304, SUS316L, SUS430, SUS409L
Aluminum Sheet / Coil1010, 3003, 5182, 5083, 6061

Product range

Grades, standards
and sizes we supply

Our regular range by material family, with the Chinese standard, thickness, typical width and main applications for each series.

Swipe the table to see standards, sizes and uses →

CategorySeriesChinese gradesStandardThicknessTypical widthTypical uses
Pickled steel coil / sheetPickled steel for stampingSPHC, SPHD, SPHE, SPHF, etc.GB/T 38813-20201.0 – 20.0 mm1,000 – 1,600 mmGeneral fabrication, furniture, home appliances, automotive
Medium and high carbon steel20#, 45#, 50#, 65Mn, etc.GB/T 699-20151.0 – 20.0 mm1,000 – 1,600 mmMachine structural parts, shafts
Cold rolled steel coil / sheetCold rolled steel for stampingSPCC, SPCD, SPCE, SPCF, SPCG, etc.GB/T 5213-20190.3 – 4.0 mm600 – 1,500 mmAutomotive parts, home appliances
Cold rolled steel for stampingDC01, DC03, DC04, DC05, DC06, etc.GB/T 5213-20190.3 – 4.0 mm600 – 1,500 mmAutomotive parts, home appliances
Galvanized steel coil / sheetGalvanized steel for stampingDC51D+Z, DC52D+Z, DC53D+Z, DC54D+Z, DC56D+Z, DC57D+Z, etc.Surface: passivated, non-passivated, anti-fingerprint, heavy zinc coatingGB/T 2518-20190.3 – 4.0 mm600 – 1,500 mmConstruction, home appliances, automotive, energy storage (where corrosion resistance is needed)
Automotive steel coil / sheetAutomotive structural steel ISAPH370, SAPH400, SAPH440, SPFH590GB/T 20887.1-20171.0 – 8.0 mm700 – 1,600 mmVehicle frames, wheels and other structural parts
Automotive structural steel IIQSTE340TM, QSTE380TM, QSTE420TM, QSTE460TM, QSTE500TM, QSTE600TM, etc.GB/T 20887.1-20171.0 – 8.0 mm1,000 – 1,600 mmStructural parts (cold forming)
Cold rolled high-strength low-alloy steelHC260LA – HC500LAGB/T 20564.4-20220.5 – 3.0 mm600 – 1,500 mmStructural parts and reinforcements
Hot-dip galvanized high-strength low-alloy steelHC260LAD+Z – HC420LAD+ZGB/T 2518-20190.5 – 3.0 mm600 – 1,500 mmStructural parts (high strength, galvanized)
Cold rolled dual-phase steelHC250/450DPD+Z, HC340/590DPD+Z, HC420/780DPD+Z, HC550/980DPD+Z, HC820/1180DPD+Z, etc.GB/T 2518-20190.5 – 3.0 mm600 – 1,500 mmStructural parts (dual-phase steel)
Galvanized dual-phase steelHC420/780DPD+ZGB/T 2518-20190.5 – 3.0 mm600 – 1,500 mmSafety structural parts
Silicon steelNon-oriented silicon steel35W210, 35W250, 35W270, 35W300, etc.; 50W310, 50W350, 50W470, 50W600, 50W800, 50W1300, etc.GB/T 5213-20190.15 – 0.65 mm600 – 1,500 mmFans and pumps, industrial motors, new-energy vehicle motors
Grain-oriented silicon steel23Q110, 27Q120, 30Q130; 23QG085, 23QG090, 27QG095, 30QG100, 30QG115, etc.GB/T 5213-20190.15 – 0.65 mm600 – 1,500 mmTransformers, new-energy motors
Stainless steel coil / sheet—SUS304, SUS316L, SUS430, SUS409L, etc.GB/T 20878-20240.3 – 50.0 mm1,000 – 2,000 mmKitchenware, chemical equipment, architectural decoration, automotive
Aluminum sheet / coil1000, 3000, 5000 and 6000 series1010, 3003, 5182, 5083, 6061, etc.GB/T 3880-20240.5 – 50.0 mm1,000 – 2,000 mmAerospace, shipbuilding, automotive, construction
  1. Besides pure zinc coatings, we also supply galvannealed (zinc-iron), aluminized, aluminum-zinc, aluminum-magnesium and zinc-aluminum-magnesium coated products.
  2. We handle a very wide range of grades and cannot list them all here — for a specific or special grade, please contact us.
  3. The grades above are common Chinese standard grades. Every Chinese mill also works to its own standard (all conforming to the national standards), and we can supply material to any of these mill standards.

Grade cross-reference

Your grade,
our equivalent

Chinese grades matched to JIS, ASTM, EN, POSCO and KS, from mild steel through advanced high-strength steel. Open a row to see the matching carmaker grades.

Swipe the table to see JIS, ASTM, EN, POSCO and KS →

Grade levelBaosteel (CN)JISASTMENPOSCOKS
Mild steel
CQCommercial qualityDC01 BLCJS-SPCC-SA1008-CSEN-DC01CSP1-S PCT270C-SKS-SCP1-S KS-SPCC-S
LQLight stampingDC03 BLDJS-SPCC-S—EN-DC03CSP1D-S/-E PCT270L-S/-EKS-SCP1-S KS-SPCC-S
DQDrawing qualityDC04 BUSDJS-SPCD-SA1008-DSEN-DC04CSP2-S/-E PCT270D-S/-EKS-SCP2-S KS-SPCD-S
DDQDeep drawingDC05 BUFDJS-SPCE(N)-SA1008-DDSEN-DC05CSP3(N)-S/-E PCT270N-S/-EKS-SCP3N-S KS-SPCE-S
EDDQExtra deep drawingDC06 BSUFDJS-SPCFA1008-EDDSEN-DC06CSP3E-S/-E PCT270E-S/-E—
S-EDDQSuper extra deep drawingDC07JS-SPCG—EN-DC07CSP3X-S/-E—
High-strength steel (HSS)
MicroalloyedHigh-strength low-alloyST37-2G—A1008-33—CHSP220Y—
RephosphorizedPhosphorus-alloyed high strengthB180P2/HC220PJS-SPFC340A1008-33HC220PCHSP35RKS-SPFC340
IFInterstitial-free high strengthHC180Y———PCY180E(-E)—
BHBake hardeningHC180B B180H1 B180H2——HC180BPCY180B(E) CSP28BH-E—
Advanced high-strength steel (AHSS)
DPDual phaseHC250/450DP———CHSP45DP(-E)—
TRIPTransformation induced plasticityHC380/590TR———CHSP60TR—
TWIPTwinning induced plasticity————CHSP780TW—
CPComplex phaseHC820/1180DP———CHSP120CP PCT1180P-M—
HPFHot press forming————PCT1470H—

Swipe the table to see JIS, ASTM, EN, POSCO and KS →

Grade levelBaosteel (CN)JISASTMENPOSCOKS
Mild steel
CQCommercial qualityDC51D+ZJS-SGCCA653M-CSDX51D+ZCGCC PGT270C-SKS-SGCC
LQLight stampingDC52D+ZJS-SGCD1A653M-FSDX52D+ZCGCF PGT270L-S/-EKS-SGCD1
DQDrawing qualityDC53D+ZJS-SGCD2A653M-DS-DSDX53D+ZCGCD PGT270D-S/-EKS-SGCD2
DDQDeep drawingDC54D+ZJS-SGC3NA653M-DS-DDSDX54D+ZCGCN PGT270N-S/-EKS-SGC3N
EDDQExtra deep drawingDC56D+ZJS-SGCD-3A653M-DS-EDDSDX56D+ZCGCE PGT270E-S/-E—
S-EDDQSuper extra deep drawingDC57D+Z———CGCX—
High-strength steel (HSS)
MicroalloyedHigh-strength low-alloyH220PD———CGCHS220Y—
RephosphorizedPhosphorus-alloyed high strength————CGCHS40—
IFInterstitial-free high strengthHC220YD+Z——HX 220YD+ZFPGY220E(-E) CGCHS35—
BHBake hardeningHC180BD+Z——HX 180BD+ZFCGCHS28B(-E) PGY180B(-E)—
Advanced high-strength steel (AHSS)
DPDual phaseHC300/ 500DP+Z———CGCHS50DP PGT490D(-E)—
TRIPTransformation induced plasticityHC380/590TRD+Z———CGCHS590TR—
TWIP 980Twinning induced plasticity————CGCHS980TW PGT980W—
CPComplex phase————CGCHS120CP PGT1180P—

Swipe the table to see JIS, ASTM, EN, POSCO and KS →

Grade levelBaosteel (CN)JISASTMENPOSCOKS
Mild steel
CQCommercial qualityDC51D+ZFJS-SGCCA653M-CSDX51D+ZFCGCC PAT270C-SKS-SGCC
LQLight stampingDC52D+ZFJS-SGCD1A653M-FSDX52D+ZFPAT270L-S/-EKS-SGCD1
DQDrawing qualityDC53D+ZFJS-SGCD2A653M-DS-DSDX53D+ZFCGCD PAT270D-S/-EKS-SGCD2
DDQDeep drawingDC54D+ZFJS-SGC3NA653M-DS-DDSDX54D+ZFCGCN PAT270N-S/-EKS-SGC3N
EDDQExtra deep drawingDC56D+ZF—A653M-DS-EDDSDX56D+ZFCGCE PAT270E-S/-E—
S-EDDQSuper extra deep drawingDC57D+ZF——DX57D+ZFCGCX(-E)—
High-strength steel (HSS)
MicroalloyedHigh-strength low-alloyH220PD—A653M-275—CGCHS220Y—
RephosphorizedPhosphorus-alloyed high strengthH220PDSGC340——CGCHS35R—
IFInterstitial-free high strengthHC180YD+ZF——HX 180YD+ZFCGCHS35E(-E) PAY180E(-E)—
BHBake hardeningHC180BD+ZF—A653M-BHS 410HX 180BD+ZFCGC28BH-E PAY180B(-E) PAT270B(-E)—
Advanced high-strength steel (AHSS)
DPDual phaseHC300/ 500DP+ZF——HCT 500X+ZFCGCHS50DP(-E)—
TRIPTransformation induced plasticityHC380/590TRD+ZF———CGCHS590TR—
TWIPTwinning induced plasticity————CGCHS780TW—
CPComplex phase————CGCHS120CP PAY1180P-HY PAT1180P—

Equivalents are for reference. Tell us the grade, coating and thickness you buy today and we will confirm the exact material and mill.

Product showcase

Steel grades across
the car body

Below is a car body where our materials (press-hardening, TRIP, multiphase, dual-phase, high-strength and deep-drawing steel) are typically used.

Steel grades used across car body parts
  • Middle floor panel

    Middle floor panel

    HC380LAD+Z · 0.8 mm
  • Rear floor assembly

    Rear floor assembly

    5754-O aluminum · 1.4 mm
  • Battery pack cover

    Battery pack cover

    HC550/980DP+Z · 1.0 mm
  • Wheel house

    Wheel house

    DC54D+Z · 0.7 mm
  • Chassis subframe

    Chassis subframe

    S550MC · 2.5 mm
  • Air-conditioner panel

    Air-conditioner panel

    DC53D+Z100 · 0.5 mm