Service & support

Service & Support

Customized supply, pre-sales technical support and reliable after-sales service.

Customized service

From your drawing
to your plant

We are capable of participating in the Project from its initial technical kickoff meeting, supplying qualified materials for die tryout, and subsequently sustaining consistent and reliable delivery to guarantee the uninterrupted operation of serial production.

  1. 01

    Technical Kickoff meeting

    We review your part, forming process, annual volume and target cost.

  2. 02

    Material customization

    Grade, coating, thickness and dimensions matched to your drawing.

  3. 03

    Die tryout & sampling

    Trial material for die tryout and small lots for sample approval.

  4. 04

    Mass production

    Stable supply from mill to processing line once the part is approved.

  5. 05

    Delivery

    Packed to your standard and delivered on schedule, with the mill test certificate.

Pre-sales service

Support before
you buy

  1. Technical consultation

    Prior to the formal placement of your purchase order, our professional technical team shall respond to all your inquiries concerning material grades, coating specifications, forming feasibility and processing compatibility in a timely and comprehensive manner.

  2. Material selection advice

    We shall provide professional material recommendation that fully aligns with the component's functional specifications, forming process feasibility and the approved project budget.

  3. Cost optimization proposals

    We shall systematically explore cost reduction potential in material grade specification, dimensional tolerance optimization and material yield enhancement, so as to minimize the overall total cost of the component.

Processing services

Processing capabilities

A complete overview of equipment capabilities and operational working ranges at both our Shanghai and Suzhou production sites is available for your reference. Upon receipt of your full part specifications, our engineering team will evaluate all feasible manufacturing paths and recommend the most technically efficient production route for your project.

Full working range of every line
ProcessEquipmentCapability
Slitting1,850 mm and 1,650 mm slitting lines in Shanghai; 1,850 mm line with automatic knife setting in SuzhouThickness 0.3–5.0 mm, width up to 1,850 mm, tensile strength up to 700 MPa (Suzhou)
Cut-to-length1,650 mm and 850 mm flying-shear linesFlat, accurately sized sheets from coil
Swing shearing1,850 mm swing-shear line (Suzhou)Trapezoidal and angled blanks
Die blanking800 t coil-fed blanking line with 4,500 × 2,000 mm bed; 630 t frame-press line (Shanghai No. 3)Covers nearly all sizes and strengths of cold-rolled automotive steel
Laser blankingDual-head IPG laser, up to 4,000 W; 6-high 19-roll leveler0.6–3.0 mm; rectangles, trapezoids, parallelograms and free-form shapes; in-line laser marking
Laser weldingGerman Laserline 5,000 W diode laser, fiber, laser head and HD CCD0.5–3.2 mm thick, 80–650 mm long, 100–900 / 1,500 mm wide; ±0.03 mm positioning; up to 70 m/min; double-blank detection

Lines in operation — click to play

FAQ

Frequently asked questions

More questions? Write to us at sales@shxueyan.com.

Quality traceabilityHow do you ensure quality traceability?

Every grade can be supplied with its mill test certificate, and each delivery can be traced back to the source coil and mill.

Fast complaint responseHow quickly do you respond to quality complaints?

Our team responds quickly to every customer complaint, investigates the cause and agrees the next steps with you.

Replacement supportDo you provide replacement material support?

Yes. When material needs to be replaced, we arrange supply so that your production is affected as little as possible.

Continuous improvementHow do you prevent problems from happening again?

We run a continuous improvement mechanism: issues are analysed, corrective actions are put in place and results are followed up.