Home  >  News

Newsroom

News

Company updates, plant stories and practical guides to choosing and processing flat-rolled metal.

  • Newest
  • Oldest
  • Name A-Z
  • Name Z-A
Inside Xueyan's Suzhou Processing Plant

Inside Xueyan's Suzhou Processing Plant

Our Suzhou plant sits on Hutai New Road in Fuqiao Town, Taicang, Jiangsu Province. The site covers 28,000 m², with 15,000 m² of warehousing dedicated to steel coil storage and processing.Processing lines1,850 mm slitting line with automatic knife setting1,850 mm swing-shear lineLaser blanking lineCore components of the processing equipment are imported, keeping the plant at the leading edge of the industry.CapabilityThe plant processes cold rolled, galvanized and electro-galvanized, pickled, silicon and color-coated steel. It handles thickness from 0.3 mm to 5.0 mm, width up to 1,850 mm and tensile strength up to 700 MPa for slitting, cut-to-length, die blanking and laser blanking.Annual processing capacity reaches 600,000 tonnes, with coil throughput of 1.2 million tonnes per year.

Laser Welding and Laser Blanking at Xueyan

Laser Welding and Laser Blanking at Xueyan

Automotive customers increasingly need blanks, not just coils. Our blanking and welding equipment turns flat-rolled steel into parts that go straight to the press line.Laser weldingGerman Laserline diode laser, maximum power 5,000 WLaserline optical fiber, laser head and HD CCD visionThickness 0.5–3.2 mm, length 80–650 mm, width 100–900 mm / 1,500 mmPositioning accuracy ±0.03 mm and welding speed up to 70 m/minDouble-blank detection systemLaser blankingA dual-head IPG laser with up to 4,000 W cuts rectangles, trapezoids, parallelograms and free-form shapes, with in-line laser marking. A 6-high, 19-roll leveler handles material from 0.6 to 3 mm.Die blankingOur 800-ton coil-fed blanking line has a 4,500 × 2,000 mm bed and covers almost the full range of cold-rolled automotive steel sizes and strengths.

A Buyer's Guide to Galvanized Steel Grades DC51D+Z to DC57D+Z

A Buyer's Guide to Galvanized Steel Grades DC51D+Z to DC57D+Z

Hot-dip galvanized steel is specified by forming grade and surface treatment. Choosing correctly avoids cracking in the press and problems in painting or assembly.Forming gradesDC51D+Z – forming quality, for bending and simple shapesDC52D+Z – drawing qualityDC53D+Z – deep-drawing qualityDC54D+Z – special deep-drawing qualityDC56D+Z – extra deep-drawing qualityDC57D+Z – super deep-drawing quality for the most demanding partsThe deeper and more complex the draw, the higher the grade you need. For structural parts that need strength rather than formability, consider high-strength galvanized grades such as HC260LAD+Z to HC420LAD+Z.Surface treatmentsPassivated – protects against white rust in storage and transportNon-passivated – preferred when parts will be phosphated and paintedAnti-fingerprint – clean appearance for visible or bare-use partsHeavy zinc coating – extended corrosion protectionOur team can recommend the grade and coating for your part and supply material as coil, slit coil, sheet or blanks.

Total: 3 Articles